IP113M/N LF can be a 10/100BASE-TX to 100BASE-FX converter with an SMI port for management. It consists of a 2-port switch controller, a fast Ethernet transceiver and a PHY for 100BASE-FX. The transceivers in IP113M/N LF are designed in DSP approach with advance 0.25um technology; this results in high noise immunity and robust performance.

IP113M/N LF not only supports store and forward mode, it also supports modified cut through mode and pure converter mode for low latency data forwarding. IP113M/N LF can transmit packet(s) up to 1600 bytes to meet the requirement of extra long packets.Lan Transformer  for  TX   1:1  16YM001,YL18-2050S,YT18-2050S   or   YL2J011D

IP113M/N LF supports remote management function. IP113M/N LF supports remote access functions and it also supports remote monitor and loopback test function defined in TS-1000 spec (*). Local IP113M/N LF can access the MII registers of remote IP113M/N LF by programming local IP113M/N LF’s MII registers via SMI connection. IP113M/N LF implements the management function using the maintenance frame defined in TS-1000 spec.

IP113M/N LF supports IEEE802.3x, collision base backpressure, and various LED functions, etc. These functions can be configured to fit the different requirements by feeding operation parameters via EEPROM interface or pull up/down resistors on specified pins.

IP113M+YL18-2050S+RJ45

IP113M+YT18-2050S+RJ45

IP113M+16YM001+RJ45

IP113M+YL2J011D